Caramel Crunch Flavour Concentrate 30ml by Vampire Vape

Description

Caramel Crunch Flavour Concentrate 30ml

Specification:

• 30ml Bottle of Flavour Concentrate.

Vampire Vape

• Vampire Vape PG Based Flavour Concentrate use only in E-Liquid. Dilute to suit user, between 10-20% depending on required flavour strength. Contents approx 30ml
• All flavours made from the highest quality ingredients made in the UK in a clean room from creation to bottling.
• All come with batch numbers and expiry dates.
• Sample liquids held for future testing to ensure the highest quality product.
• If it doesn’t pass QC it doesn’t go out the door.
• Not intended to be vaped on its own.
• These concentrates are for personal use for commercial purposes.

Mixing Instructions

These are flavour concentrates that will require you to mix them with nicotine shots and appropriate base liquid. 30ml of flavour concentrate can make approx 150ml of e-liquid.

• For MTL kits its recommended to use a 50/50 mix (MTL base liquid and 50/50 nic shots).
• For Sub Ohm Kits its recommended to use a 70/30 mix (VG base lquid and 70/30 nic shots).

Making 50ML using 18mg 10mlnicotine shots:

1. Remove the top of your bottle and pour 10ml of flavour concentrate into a 50ml mixing bottle.
2. Next add the 10ml nicotine shots to the 50ml mixing bottle with the flavour concentrate.
   For the desired strength :
   1x bottle = 3.6mg
   2x bottles = 7.2mg
   3x bottles =10.8mg
   4x bottles = 14.4mg
3. If using 3x nicotine shots or less top up the 50ml bottle with the correct base liquid, ie MTL base for MTL kits and devices or VG base for Sub-ohm kits and devices.
4. Put the bottle top back on making sure its secured properly, screw the child proof cap back on and give the bottle a good shake so that the contents is mixed together.
5. The liquid is now ready to vape.

Making 100ml using 18mg nicotine shots:

1. Remove the top of your bottle and pour 20ml of flavour concentrate into a 100ml mixing bottle.
2. Next add the 10ml nicotine shots to the 100ml mixing bottle with the flavour concentrate.
   For the desired strength add the following amount of nicotine shots:
   1x bottle = 1.8mg
   2x bottles = 3.6mg
   3x bottles =5.4mg
   4x bottles = 7.2mg
   5x bottles = 9mg
   6x bottles = 10.8mg
   7x bottles = 12.6mg
   8x bottles = 14.4mg
3. If using 7x nicotine shots or less top up the 100ml bottle with the correct base liquid, ie MTL base for MTL kits and devices or VG base for Sub-ohm kits and devices.
4. Put the bottle top back on making sure its secured properly, screw the child proof cap back on and give the bottle a good shake so that the contents is mixed together.
5. The liquid is now ready to vape.